What are the ways and applications of Raymond grinding powder into the tank?

What are the ways and applications of Raymond grinding powder into the tank?

Raymond mill's conventional installation method consists of a main engine, a fan, a cyclone, a dust collector, and a piping system. Nowadays, a kind of installation method is more and more popular with users. That is, Raymond Mill uses fan power to directly transport the powder into the powder tank, no longer uses the cyclone separator, or only uses a part of the cyclone separator. The advantage of this method is that the powder after the Raymond grinding can be directly into the tank, which reduces the transportation and packaging of the powder, greatly saves the labor cost and saves the powder transportation cost. And this method is common on the size of the Raymond mill model, but it is different. The main difference is that the height of the Raymond mill is sent to the top of the tank due to the different sizes of Raymond mills. Restriction, the larger the Raymond mill, the larger the matching tank and the larger the storage volume. As for the height of each tank, it is necessary to blindly raise the tank according to Raymond mill. Sometimes it may not achieve the expected effect, but the investment tank will cause unnecessary losses.

How to ensure the smooth and smooth powdering of Raymond Mill?

In the process of producing Raymond mill, some abnormal phenomena may not be avoided, resulting in blockage of powder from the equipment. The root cause is mainly caused by some factors of the equipment itself. So, how to ensure the smooth and smooth powdering of Raymond Mill?

1. Raymond mill is in operation, to ensure the coordination of various rotors, bearings, spindles, etc., and the user should do a good job of lubrication of these parts. At the same time, when the parts are lubricated, the parts need to be inspected to see if the parts have large damage, so that the equipment can be kept in good working condition, and the powdering efficiency of the equipment is effectively guaranteed.

2. For the operation of Raymond Mill, just like the social operation, there is no rule and no rules. Only under the requirements of the rules can we ensure stable and normal development. For Raymond Mill, only under clear regulations can Perfect operation, so as to reduce the equipment failure rate and ensure the powder extraction rate of Raymond mill.

3, regular maintenance of Raymond mill, maintenance and maintenance are different, regular maintenance is mainly after the equipment is used for a period of time, the parts that are obviously worn parts are replaced and repaired, and the loose parts are carried out Work on fastening and other aspects. At the same time, the equipment can be inspected once in a large way to ensure that the equipment is working and can reduce the incidence of failures.

What is the cause of the blockage of the Raymond machine?

During the production and use of Raymond machine, the circulation air duct will be blocked. Here, Xiaobian reminds everyone to stop the material in time and check the cause of blockage of the air duct. After the inspection, the material can be ground. Powder production. What are the reasons for the blockage of the air duct, the following is a brief introduction.

First, uneven feeding

Too much or too little material will cause the Raymond machine to be insufficiently ground. The finished powder can not be discharged in the circulation duct under the action of the blower in time, thus increasing the working load of the blower, causing the material to accumulate in the air duct, eventually leading to the air duct. Blocked. Therefore, when feeding the Raymond machine, ensure that the material is continuously and evenly distributed to avoid the phenomenon of air passage blockage.

Second, the bag filter can not work

The main dust collector of the bag filter increases the air volume in the circulating airflow, and at the same time removes the dust particles in the airflow, and purifies the increased exhaust air volume and discharges it outside the machine. When the bag filter cannot perform the dust removal operation normally, then there will be a large amount of dust particles. The material accumulates in the air duct, causing blockage of the air duct. Therefore, it is necessary to stop the inspection of the bag filter in time to ensure the normal operation of the bag filter.

Third, the fan power is insufficient

Insufficient power of the fan will result in insufficient air volume, and the material will flow normally in the air duct, which will also cause material accumulation.

Fourth, the blower

The material is transported along the bad air duct under the action of the blower. Therefore, the normal operation of the blower should be maintained. When the wind of the blower is too small to transmit the material, the rated power and voltage of the Raymond machine should be maintained during the overhaul. In order to ensure a stable and lasting work of the equipment.